Version anglaiseVersion espagnoleVersion françaiseInscrivez-vous, c'est gratuit ! (mot de passe oublié)
- Vendredi 21 novembre 2008 - 10:26:56
- inscrits : 1070016
- connectés : 38407
- questions/jour : 4869
- Taux de réponse : 76.73%
Plateformes d'assistanceDiscussions & Opinions des Communautés
|
|
|
|
Bonjour
J'aimerais un peu d'aide pour ce test QCM concernant WINDOWS préalable à un entretien d'embauche.
D'avance merci.
Windows
21. You add a new SCSI controller and network adapter to an existing Windows NT Server computer. After you start the server, you receive a message that says, "The dependency service failed to start." Where should you look for additional information?
a) The Bootlog.txt file
b) The Device.log file
c) The Services, option in Control Panel
d) Event viewer
22. How do you create the setup diskette, for windows 2000?
a) Run bootdisk.exe from the makeboot folder on the win2k cd
b) Run makeboot.exe from the bootdisk folder on the win2k cd
c) Run winnt/ox
d) Run winnt/x
23. Can you use a Windows NT4 PDC as a Domain Controller (DC) in a Windows 2000 domain?
a) No
b) Yes
c) Only if you have Service Pack 6 installed
24. How can you install the Recovery Console in Windows 2000? (Select the best choice)
a) Its installed by default
b) Install Service Pack 2
c) Run winnt32.exe with the /cmdcons switch from the W2K CD
d) There is no such thing in Windows 2000
e) Run winnt32.exe /erd
25. How do you install the Terminal Services in Windows 2000?
a) control panel, add/remove programs, add/remove windows components, terminal services
b) control panel, add/remove programs, terminal services
c) control panel, add/remove windows components, terminal services
d) start, programs, add/remove programs, add/remove windows components, terminal services
e) start, programs, add/remove windows components, terminal services
26. After you install a Service Pack under NT/2000, should you reinstall the manufacturer proprietary drivers?
a) No
b) Yes
c) Only under NT
27. In Windows 2000, which of the following commands is used to change a FAT or FAT32 partition to NTFS?
a) CHKDSK /F
b) FORMAT (drive letter): /FS
c) CONVERT (drive letter): /FS:NTFS
d) CHKDSK
28. What is the minimum version of Windows 2000 that supports clustering?
a) Windows 2000 Server
b) Windows 2000 Advanced Server
c) Windows 2000 Datacenter Server
d) All versions of Windows 2000 Server
29. Which of the following component is mandatory for active directory installation with Windows 2000?
a) Mac
b) DHCP
c) WINS
d) DNS
30. How would you promote Windows 2000 from member server to DC?
a) By using dcpromo
b) By joining a domain
c) By installing DNS
d) By installing WINS
31. What are the 3 (three) major monitoring tools used in Windows 2000?
a) Widows 2000 System Monitor
b) Microsoft Management Console (MMC)
c) Performance Logs and Alerts
d) Task Manager
e) Device Manager
32. Which one of these are the directory services for Windows 2000?
a) NDS - Network Directory Services
b) Domain Directory Services
c) Windows 2000 Directory Services
d) Active Directory
e) Active Domain Services
33. How would you troubleshoot a Windows 2000 server that gives "“Windows 2000 could not start because the following file is missing or corrupt: system32\ntoskrnl.exe. " as error message?
a) Start by using repair disks
b) Start by using Recovery Console and modify Boot.ini
c) Start by using f10
d) Start by erasing the system
34. A customer running Windows 2000 Advanced Server calls complaining that under Task Manager it lists 8 processors when in fact there are only 4 installed. What could be the reason for this?
a) This is due to Simultaneous Multi-Threading. The OS will see one processor that supports hyper-threading as 2 processors.
b) This is due to a faulty system board ROM, which requires replacement.
c) This is a known issue with Service Pack 2 for Windows 2000. Advise the customer to update to Service Pack 3
35. A customer has a server with NT4 Service Pack 4. The server should power off after shutdown. What has to be done to achieve this?
a) NT4 will does not support auto power off
b) Auto power off requires Service pack 5 or later
c) Set the following registry key to 1 “HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon "PowerDownAfterShutdown”
d) Copy "Hal.dll.softex" from the i386 folder in the SP4 (or later) CD to the winnt\system32 directory. Rename the existing hal.dll file to hal.xxx, and rename Hal.dll.softex to hal.dll, and then do the above registry change.
J'aimerais un peu d'aide pour ce test QCM concernant WINDOWS préalable à un entretien d'embauche.
D'avance merci.
Windows
21. You add a new SCSI controller and network adapter to an existing Windows NT Server computer. After you start the server, you receive a message that says, "The dependency service failed to start." Where should you look for additional information?
a) The Bootlog.txt file
b) The Device.log file
c) The Services, option in Control Panel
d) Event viewer
22. How do you create the setup diskette, for windows 2000?
a) Run bootdisk.exe from the makeboot folder on the win2k cd
b) Run makeboot.exe from the bootdisk folder on the win2k cd
c) Run winnt/ox
d) Run winnt/x
23. Can you use a Windows NT4 PDC as a Domain Controller (DC) in a Windows 2000 domain?
a) No
b) Yes
c) Only if you have Service Pack 6 installed
24. How can you install the Recovery Console in Windows 2000? (Select the best choice)
a) Its installed by default
b) Install Service Pack 2
c) Run winnt32.exe with the /cmdcons switch from the W2K CD
d) There is no such thing in Windows 2000
e) Run winnt32.exe /erd
25. How do you install the Terminal Services in Windows 2000?
a) control panel, add/remove programs, add/remove windows components, terminal services
b) control panel, add/remove programs, terminal services
c) control panel, add/remove windows components, terminal services
d) start, programs, add/remove programs, add/remove windows components, terminal services
e) start, programs, add/remove windows components, terminal services
26. After you install a Service Pack under NT/2000, should you reinstall the manufacturer proprietary drivers?
a) No
b) Yes
c) Only under NT
27. In Windows 2000, which of the following commands is used to change a FAT or FAT32 partition to NTFS?
a) CHKDSK /F
b) FORMAT (drive letter): /FS
c) CONVERT (drive letter): /FS:NTFS
d) CHKDSK
28. What is the minimum version of Windows 2000 that supports clustering?
a) Windows 2000 Server
b) Windows 2000 Advanced Server
c) Windows 2000 Datacenter Server
d) All versions of Windows 2000 Server
29. Which of the following component is mandatory for active directory installation with Windows 2000?
a) Mac
b) DHCP
c) WINS
d) DNS
30. How would you promote Windows 2000 from member server to DC?
a) By using dcpromo
b) By joining a domain
c) By installing DNS
d) By installing WINS
31. What are the 3 (three) major monitoring tools used in Windows 2000?
a) Widows 2000 System Monitor
b) Microsoft Management Console (MMC)
c) Performance Logs and Alerts
d) Task Manager
e) Device Manager
32. Which one of these are the directory services for Windows 2000?
a) NDS - Network Directory Services
b) Domain Directory Services
c) Windows 2000 Directory Services
d) Active Directory
e) Active Domain Services
33. How would you troubleshoot a Windows 2000 server that gives "“Windows 2000 could not start because the following file is missing or corrupt: system32\ntoskrnl.exe. " as error message?
a) Start by using repair disks
b) Start by using Recovery Console and modify Boot.ini
c) Start by using f10
d) Start by erasing the system
34. A customer running Windows 2000 Advanced Server calls complaining that under Task Manager it lists 8 processors when in fact there are only 4 installed. What could be the reason for this?
a) This is due to Simultaneous Multi-Threading. The OS will see one processor that supports hyper-threading as 2 processors.
b) This is due to a faulty system board ROM, which requires replacement.
c) This is a known issue with Service Pack 2 for Windows 2000. Advise the customer to update to Service Pack 3
35. A customer has a server with NT4 Service Pack 4. The server should power off after shutdown. What has to be done to achieve this?
a) NT4 will does not support auto power off
b) Auto power off requires Service pack 5 or later
c) Set the following registry key to 1 “HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon "PowerDownAfterShutdown”
d) Copy "Hal.dll.softex" from the i386 folder in the SP4 (or later) CD to the winnt\system32 directory. Rename the existing hal.dll file to hal.xxx, and rename Hal.dll.softex to hal.dll, and then do the above registry change.
|
Salut !
Intéressant... Alors, avec des doutes sur 2 ou 3 questions, je dirais : 21 -d 22 -b 23 - a 24 - a 25 - a 26 - c 27 - c 28 - b 29 - b et d 30 - a 31 - a et c et d 32 - d 33 - b 34 - a 35 - b Les débats sont ouverts pour ceux qui ne sont pas d'accord avec moi ! :) @+ Seb - "Heureux l'étudiant qui comme la Rivière peut suivre son cours sans quitter son lit..." |
Netware
36. Where in NetWare is the abend.log stored? a) On the harddisk of the client b) In the sys:system directory c) On the volume: system directory d) In the root of sys: 37. What are the 2 commands on Netware 5.x to reboot the O/S? a) RESET SERVER b) SHUTDOWN c) DOWN d) RESTART SERVER 38. Netware creates and maintains three error log files. How are they called? a) the survey, NWerror.log and the inspect b) SYS$system.err for server errors, the VOL$event.ERR for volume errors and the TTS$system.ERR for data backed out by transaction tracking c) SYS$log.err for server errors, the VOL$LOG.ERR for volume errors and the TTS$LOG.ERR for data backed out by transaction tracking d) the EVENTLOG, the SECURITYLOG and the SYSTEMLOG 39. Netware 5.x - After loading SERVER.NLM the server loses X seconds every minute. The BIOS clock is not losing time. a) Try using a previous version of TIMESYNC.NLM (downgrade) b) Change system-board and upgrade the BIOS c) Apply latest service packs and use the latest TIMESYNC.NLM d) Clear NVRAM to reset the BIOS clock to synchronize with TIMESYNC.NLM e) Add LOAD TIMESYNC.NLM /SYNCHRONIZE to the Autoexec.ncf 40. Which network administration tool would you use to install a NetWare Support Pack on a NetWare 5.1 server? a) NDS Manager b) NetWare Administrator c) ConsoleOne d) NWConfig e) NetWare Management Portal 41. Which of the following server console commands would you use to help repair a corrupted NetWare 5 NSS volume? (Select two). a) NSS /VREPAIR b) NSS /DSREPAIR c) NSS /REPAIR d) NSS /REBUILD e)NSS /VERIFY 42. What is the minimum version of NetWare required on each node before installing NetWare Cluster Services? a) NetWare 4.2 + Support Pack 9 on each node b) NetWare 5 + Support Pack 4 on each node c) NetWare 5 + Support Pack 6a on each node d) NetWare 5.1 + Support Pack 2a on each node 43. If a NetWare Console Hangs, how is DEBUG mode accessed to down the server? a) Press CTRL+ALT+DEL twice b) Press CTRL + D c) Press Shift + Shift + Alt + Esc d) Press CTRL + BREAK twice e) Press CTRL + ALT + ESC 44. Which file under Netware 5.0 contains commands necessary to load the storage drivers, as well as some environment settings (to do with memory and packet buffers) a) AUTOEXEC.NCF b) STARTUP.NCF c) SERVER.NLM d) TIMESYNC.NLM e) DSLOADER.NLM 45. A customer installed Arcserve 6.6 IT on a server running Netware 5.1. When they start Arcserve it issues an error message saying that the SCSI controller could not be initialized. When the customer is doing a ‘list devices’ on the server console it shows an ‘unbound device object’ with the tape drives SCSI ID. What is most likely wrong? a) The customer needs to patch Arcserve because it needs updated drivers for the SCSI controller b) The customer needs to download the updated SCSI controller driver c) The customer did not load the NWASPI.CDM driver d) The customer did not select the appropriate SCSI controller driver during the installation of Arcserve and needs to reinstall Linux 46. Which of the following commands can you use to check the IP address configuration of the NIC under Linux? a) ipconfig /all b) ifconfig -a c) winipcfg d) ipcfg -a e) showip /all 47. RedHat Linux comes with a few standard, free, applications that may be used to make backups. Two of these are: a) Tar b) sbackup c) dump d) arcserve e) streamer 48. What is the function of the cron daemon in Linux and other Unixes? a) It purges virtual memory and temporary files. b) It automatically mounts CDs, floppies and other removable storage devices. c) It automatically adds a CR (carriage return) to every linefeed character. d) It executes commands at scheduled specific dates and times. 49. You have a server with a single DLT drive, running RedHat Linux. Which of the following is the proper device name for the DLT? a) /dev/dlt b) /dev/st0 c) /dev/taper d) /dev/streamer 50. Where would you find error messages from the network driver on your Linux server? a) /var/log/messages b) /root/syslog c) /syslog d) Depending on the manufacturer of the network card: /adm/log/"manufacturer" 51. 1Which command would you use to list the drivers loaded into your server running Red Hat 7.3? a) insmod b) lsmod c) rmmod d) lsdrv e) insdrv 52. In Red Hat 7.x, what command should type to start the SNMP service? a) snmp start b) snmpd start c) insmod snmp d) Run snmp 53. A customer has installed Linux RedHat 6.x on his server and now at boot time he cannot access the System Partition anymore. Using Fdisk he can see that the System Partition is still on the server. What can he do to get access again to the System Partition? a) Boot with a DOS boot disk and run the command Fdisk/mbr. b) Edit /etc/lilo.conf and add a new line for the diag partition; then run /sbin/lilo. c) With linux installed you cannot use the system partition anymore. d) Boot with a DOS boot disk; run Fdisk and make the system partition “active”. 54. How can you discover the version of the kernel which is running on a particular Linux server? a) On the command line type: "uname -v" b) On the command line type: "lskernel -l" c) On the command line type: "uname -r" d) On the command line type: "lskernel -v" 55. Client has an enterprise 8-way server with 512 MB of memory running RedHat Linux 7.3. He upgrades to 8 GB of memory, but finds that his OS is only using 4 GB. What is the solution? a) There is no solution. Linux can only use 4 GB of RAM. b) Client needs to enable “large memory access” in the Advanced Mode of the SCU (BIOS). c) Client needs to install the “enterprise” kernel using the RedHat rpm. d) Client needs to add the following line to his lilo.conf: “append: largemem”.
|
En fait j ai aussi a faire ce test et je n ai aucune des réponses sur Netware ! car je n y connais rien !
Voila ! Merci ++
|
Eh bien oui j'ai eu une réponse c'est NON !
Dommage je serai bien parti chez HP a dublin !! Je ne doit pas avoir les bonnes réponses ! il veulent peut etre du 99 % de réussite ! bon courage ...
|
voila mon probléme .
c'est a chaque foie que je veux installer un logiciel comme (hachette2000) ou des jeux comme (sim city) il y a le message suivant : this application uses WinG32.DLL,which has been incorrectly installed in the C:\WINNT\SYSTEM directory.please move it to the C:\WINNT\SYSTEM32 directory.alors le logiciel il ne foctionne pas qu'est ce que je doit fair merci d'avance
|
Résultats pour demande d'infos pour test
Tests et diagnostics du réseau Tester la configuration IP
Avant toute chose, il est recommandé de véfier la configuration IP de l'ordinateur.
Les systèmes Windows proposent un outil en ligne de commande, appelé ipconfig
permettant de connaître la configuration IP de...
www.commentcamarche.net/contents/configuration-reseau/tests-diagnostics-reseau.php3
Tests d'intrusion Tests d'intrusion
Les tests d'intrusion (en anglais penetration tests, abrégés
en pen tests) consiste à éprouver les moyens de protection d'un
système d'information en essayant de s'introduire dans le système en
situation réelle.
On distingue...
www.commentcamarche.net/contents/secu/tests-intrusion.php3
[ADSL] Tester la vitesse de connexion internet (test de débit) Les vitesses de téléchargement (théoriques) :
Connexions
Pourquoi cette différence ?
J'ai un ADSL xxxx, mais quand je télécharge ça va moins vite que ce que ça devrait, pourquoi ?
L'upload est trop lent !
Liens
Tests de débit...
www.commentcamarche.net/faq/sujet-528-adsl-tester-la-vitesse-de-connexion-internet-test-de-debit
Résultats pour demande d'infos pour test
[Mémoire] Tester ses barrettes de RAM avec MemTestTester sa RAM avec MemTest
Il existe un logiciel fonctionnant sur n'importe quel PC permettant de tester à fond ses barrettes de mémoire, il s'agit de MemTest86 :
http://www.memtest86.com
MemTest86+
Pour l'utiliser il suffit de télécharger...
www.commentcamarche.net/faq/sujet-899-memoire-tester-ses-barrettes-de-ram-avec-memtest
[Mémoire] Utiliser Windows Memory TestWindows Memory Test est un utilitaire permettant de tester la mémoire vive d'un PC. Il fonctionne sans tenir compte du système d'exploitation.
1_Création d'un support bootable
On aura besoin de créer un disque ou une disquette boot pour pouvoir...
www.commentcamarche.net/faq/sujet-2399-memoire-utiliser-windows-memory-test
[Shell] Tester une variable numériqueTester une variable numérique
Préambule
Dans un environnement "shell", les variables sont, par défaut, de type "chaîne de caractères".
De ce fait il n'est pas possible de déclarer une variable de type "entier" (enfin, ceci n'est pas tout à...
www.commentcamarche.net/faq/sujet-4605-shell-tester-une-variable-numerique
Résultats pour demande d'infos pour test
Tester vitesse connection (Résolu)bonjour, qui connait un vrai site pour tester la vitesse de connexion internet comme beaucoup de gens actuellement je suis connecté via l'adsl degroupée ( avec la freebox pour ma part ) , et comme beaucoup egalement je suis curieux de connaitre...
www.commentcamarche.net/forum/affich-2006366-tester-vitesse-connection
Tester les performance d'un PC (Résolu)Bonjour Quuelqun connait-il un logiciel capable de tester les performance d'un pc sous Windows (une comparaison par rapport a un PC de reference) Merci G.David le respect n'est pas un dû il se merite
www.commentcamarche.net/forum/affich-1852111-tester-les-performance-d-un-pc
Echec test TCP emule avec freebox (Résolu)Bonjour, Je suis sous XP Pack 2 avec la freebox. Le test de connection emule se termine par un echec du test TCP. Qu'est-ce que celà veut dire? Comment y remédier? Merci pour votre aide, Salutations, GLR
www.commentcamarche.net/forum/affich-1494490-echec-test-tcp-emule-avec-freebox
Résultats pour demande d'infos pour test
Télécharger DSL TestDSLtest est constitué d'un logiciel à télécharger gratuitement et de serveurs de test. Ces équipements vous permettent d'effectuer des mesures du débit de votre ligne ADSL (en fonction de votre abonnement) mais également d'estimer l'utilisation des...
www.commentcamarche.net/telecharger/telecharger-34055202-dsl-test
Télécharger Ping Tester 2008En informatique, "ping" est une commande permettant de tester la présence d'une machine sur un réseau.
PingTester est un outil permettant de stocker une liste d'adresses IP. Il permet également de tester les commandes réseaux afin d'augmenter son...
www.commentcamarche.net/telecharger/telecharger-34056311-ping-tester-2008